User`s manual

3. After entering your settings, select Next. The following screen appears. This page
allows the user to configure the LAN interface IP address, subnet mask and DHCP
server. If the user would like this ADSL router to assign dynamic IP address, DNS
server and default gateways to other LAN devices, select the button Enable DHCP
server on the LAN to enter the starting IP address and end IP address and DHCP
leased time.
4. Click Next to display the WAN Setup-Summary screen that presents the entire
configuration summary. Click Save/Reboot if the settings are correct. Click Back
if you wish to modify the settings.
16