User manual

10
2.2 LED Indicators
The front panel LED indicators are shown below and explained in the following table.
This information can be used to check the status of the device and its connections.
LED Color Mode Description
POWER
Green
On Power on
Off Power off
LAN 1x~4x
Green
On
Powered device connected to the associated port
(includes devices with wake-on-LAN capability
where a slight voltage is supplied to an Ethernet
connection)
Off
No activity, modem power off, no cable or no
powered device connected to the associated port
Blink LAN activity present (traffic in either direction)
WLAN
Green
On WiFi is enabled
Blink
Data transmitting or receiving over WLAN (secured
network)
Off The wireless module is not installed.
WPS
Green
On
WPS mode exists protected clients
Blink
WPS mode is on for 120 seconds
Off
WPS mode is off
ADSL
Green
On The ADSL link is established.
Off
The ADSL link is not established.
Blink
The ADSL link is training.
Alarm
Red
On The ADSL link is terminated.
Off Normal operating status.