User manual

108
F1.1 ATM Interfaces
Follow these procedures to configure an ATM interface.
NOTE: The AR-5382u supports up to 16 ATM interfaces.
STEP 1: Go to Advanced Setup  Layer2 Interface  ATM Interface.
This table is provided here for ease of reference.
Heading Description
Interface WAN interface name.
VPI ATM VPI (0-255)
VCI ATM VCI (32-65535)
DSL Latency
{Path0}  port ID = 0
{Path1}  port ID = 1
{Path0&1}  port ID = 4
Category ATM service category
Link Type Choose EoA (for PPPoE, IPoE, and Bridge), PPPoA, or IPoA.
Connection Mode Default Mode – Single service over one connection
Vlan Mux Mode – Multiple Vlan service over one connection
IP QoS Quality of Service (IP QoS) status
Scheduler Alg The algorithm used to schedule the data in the queues. There
are two algorithms to choose, strict priority and weighted fair
queueing.
Queue Weight The weight of the specified queue. This value decides how
much data can be sent in every cycle for this queue.
Group Precedence The precedence of the specified group. This value decides the
order of sending data for this queue in this group for every
cycle regardless of FIFO. The default queue precedence (strict
priority) is 8(lowest).
Remove Select items for removal
STEP 2: Click Add to proceed to the next screen.
NOTE: To add WAN connections to one interface type, you must delete existing
connections from the other interface type using the remove button.