Operations Manual

Low Battery Indicator
The LED on the top of the transmitter
indicates the status of the battery as
well as indicating that the unit is turned
on. When turned on, the LED illuminates.
If the battery is low the green LED will
blink rapidly to warn you that the battery
will soon be dead. Replace a low battery
immediately.
Battery Removal / Replacement
M-216 OPERATING INSTRUCTIONS
Page 4
Pull back battery door latch and allow
battery cover door to spring open. To
remove battery, simply manipulate the
bottom of battery out of the compartment
and remove.
To insert battery, face
battery with negative terminal
in line with large hole in battery
compartment, press battery into
compartment and close battery door until
it snaps shut. Note: It is not possible to put
battery in backwards.
Battery indicator LED