User guide

Chapter 3 - Using the Web Server Interface (WSI) 3-13
Vipersat Configuration
To maintain any parameter changes in flash memory, select Save from the Main
Menu bar.
STDMA Mode
The STDMA parameters for this SLM-5650A are accessed by selecting
STDMA from the Vipersat submenu.
The fields in the STDMA configuration page will vary depending on the func-
tion the target SLM-5650A performs in the network. The page shown in
figure 3-12 is from an SLM-5650A serving as a Hub in the network.
Figure 3-12 STDMA Page (Hub, Dynamic Cycle mode)