User guide

Menu Descriptions
3-8 Vipersat SLM-5650A User Guide
Figure 3-7 FAST Features Page
Verify whether or not the Vipersat FAST Feature is Installed (as shown). The
codes are entered per customer order prior to shipment from the factory;
however, if the feature displays as
Not Installed, an updated FAST code will
have to be re-entered to enable the Vipersat features.
The FAST Feature codes are entered using the front panel of the modem
(figure 3-8). With the keypad, select
Utility: FAST -> Configuration -> Enter NP Code.
Enter the 20 digit code that is provided by either the network administrator or
Comtech Vipersat Networks Customer Support.
Figure 3-8 Front Panel, SLM-5650A Modem
Tip: The FAST Feature codes are generated and stored by the unit serial
number for the target SLM-5650A. The target unit’s serial number can be
found on the rear of the unit chassis, or on the FAST code menu.
Caution: Upgraging the FAST features will cause a modem reboot and
reconfiguration of all modem parameters.
To maintain any parameter changes in flash memory, select Save from the Main
Menu bar.