User guide

VMS Network Configuration
3-24 VMS User Guide
Figure 3-26 InBanding a Remote
4. Right-click on the Subnet and open the Properties page.
The General tab, which opens first, allows the operator to enter a Subnet
Name, if desired, and add External Subnets. External Subnets are
additional networks beyond the local area network of the modem.
If the remote site has a router, and applications you wish to switch on (voice,
e.g.) reside on the other side, insert the Subnet Address and Mask here. See
figure 3-27, below.
Figure 3-27 Subnet Properties, General tab
5. The InBand tab on the Properties page (figure 3-28) displays the Home
State, the Remote Modulator, the Downlink Modulator (if selected), and
the Uplink Demodulator.