User guide

VMS Network Configuration
3-14 VMS User Guide
3. Right-click on the unit icon again and select Force Registration.
This will force the parameter set in the modem. VMS will then set the
parameter every time it registers the unit.
Figure 3-11 Auto Home State Timeout setting
Bandwidth Manager Configuration
Create Satellite(s)
The first step is to create the satellite for the network with the appropriate oper-
ating frequency information.
1. Right-click on the Bandwidth Manager and select Create Satellite from the
drop-down menu (figure 3-12).
2. Enter the satellite Name and the Center and Translation Frequency set-
tings in the Create Satellite dialog (figure 3-13).
Check with your service provider if unknown. Bandwidth Allocation and
Location entries will be defined later, if necessary.
CDM-570/570L
SLM-5650A