User guide

Chapter 2 - VMS Installation 2-17
VMS Server Installation
8. If the VMS server is to operate in a Domain, enter the domain name in the
Domain field exactly as the domain is named.
Caution: Failure to have an exact match between the assigned domain name
and the domain name entered in this dialog will cause VMS to fail,
requiring re-installation.
9. The Password field is auto-filled with the default password, vipersat. Enter a
new password, if desired, to change the default setting.
Note: If this is an upgrade of a domain account, enter the password associ-
ated with this acount.
10. Click the Next button when this dialog is complete.
11. The Choose Components dialog appears, as shown in figure 2-16. All ser-
vices are selected by default for a typical VMS installation. It is recom-
mended that these settings not be changed, except for non-standard
installations.
Figure 2-16 Choose Components dialog
12. Click the Next button to proceed.
13. In the Choose Install Location dialog shown in figure 2-17, it is recom-
mended that the default file location be used. Click the Next button to con-
tinue.