User guide

Chapter 2 - VMS Installation 2-15
VMS Server Installation
Figure 2-13 License Agreement screen
4. From the Installation Type screen shown in figure 2-14, select the radio
button for the type of installation you will be making. The VMS software is
comprised of two main components, the Server component and the Client
component.
• Full Install - This type of installation installs both components, and
allows a local user to operate VMS locally on the server and also
remotely. This installation type requires a USB key to operate VMS.
• Server Install - This type of installation only installs the Server
component, and allows the VMS server to be operated through a remote
connection by a client—the VMS can not be operated from the local
server. This installation type requires a USB key to operate VMS.
• Client Install - This type of installation only installs the Client
component, and is used to install the VMS client on a workstation that
will be used to connect remotely to servers on the same LAN that are
running the VMS. This installation type does not require a USB key to
operate VMS.