User guide

Appendix E - SNMP Traps E-3
Configuring SNMP Traps
Configuring SNMP Traps
To configure SNMP traps, from ViperView, shown in figure E-1, right click on
the server’s icon and select the Properties command from the drop-down menu.
Figure E-1 Server drop-down menu
Clicking the Traps tab on the server’s properties screen displays the Traps
dialog shown in figure E-3.
Figure E-2 Properties general tab
Select the Traps tab to display the SNMP Manager TRAP dialog shown in
figure E-3. You can enter the Trap’s destination information consisting of:
• IP address of SNMP manager receiving trap
• Port number