User guide

General
6-4 VMS User Guide
Figure 6-4 New SNMP modem dialog
5. The unit will now appear listed in the SNMP Modem Manager. Right click
on the added unit and select Properties from the drop down menu to display
the General tab shown in figure 6-5.
a. Assign a name to the CDM-600L in the top dialog box for reference.
b. The IP Address box is a read-only display of the IP address of the target
CDM-600L. Add the Subnet Mask in the provided dialog
c. Insure the SNMP settings are correct. For a CDM600 the Read and Write
communicties are admin1234. For all other devices the Read community
is Public and the write community is Private.
d. If the CDM-600L is connected to a BUC, LNC or other device, select the
Enable Radio Devices check-box to have this configuration recognized
by VMS.
Figure 6-5 CDM-600L properties screen
Once a CDM-600L and its companion CiM-25 are configured and are
connected to the network, the CDM-600L will appear in the SNMP Manager
Manager as shown in figure 6-6.