User guide

Chapter 6 - Out-of-Band Units 6-3
General
The percent of allocation applied to carriers when switched by VMS. The
default is 35% allowing for an allocation factor of 1.35.
Note: Currently this carrier guardband setting for OOB is separate from the
inband setting under the Vipersat Manager
and must be set to the same
value.
The following procedure demonstrates using the SNMP Manager using a
CDM-600L as an example.
1. From ViperView, right-click on the SNMP Manager to display the drop-
down menu shown in figure 6-2.
Figure 6-2 Declaring a CDM-600L
2. Select the Declare Modem command from the drop-down menu to display
the New SNMP Modem dialog shown in figure 6-3.
Figure 6-3 CDM-600L IP address dialog
3. From the Unit Type drop-down menu select the modem type to be declared.
In this example the CDM600L modem is selected.
4. Enter the assigned IP address in the IP Address dialog box shown in
figure 6-4.
NOTE