User guide

Chapter 5 - VMS Services 5-33
VMS Service Managers
Figure 5-47 New subnet dialog
•Modify - Selecting an existing subnet from the External Subnet listing
then clicking the Modify button brings up the New Subnet dialog
displayed in figure 5-47. The existing subnet IP address and subnet mask
will be displayed. Make the modifications required in this dialog then
click the OK button to make the changes.
•Remove - Selecting an existing subnet from the External Subnet listing
then clicking the Remove button deletes the sunbet from the list.
In Band tab
The In Band tab Home State box, shown in figure 5-48, shows the switching
modulator device’s home state:
• Frequency
• Bitrate
• Power
You can enter new values, as required, for each of these parameters in the dialog
box associated with the parameter.