User guide

VMS Service Managers
5-30 VMS User Guide
Figure 5-41 Disable in-band extension warning
Clicking the Yes button will disable in-band extension and you will lose the
home state and policy settings set when In-Band Extensions were enabled.
Soft Reset
Selecting the Soft Reset command from the drop-down menu causes an imme-
diate soft reset of the selected unit.
Resize Uplink Carrier
Selecting the Resize Uplink Carrier command from the drop-down menu in
figure 5-38 displays the dialog shown in figure 5-42. You can enter a new bit
rate value for the uplink in the New Bitrate window when manually switching
to SCPC mode.
Figure 5-42 Resize uplink dialog
Clicking the Extra button brings up the dialog shown in figure 5-43. The items
listed in the Modem Extra listing will vary depending on the modem types.
Figure 5-43 Uplink Modem Extra dialog