User guide

VMS Service Managers
5-24 VMS User Guide
Figure 5-30 Distribution List Window
3. Enter the desired Destination IP address.
Typically, this will be a unique multicast address for a specific remote or
remotes utilizing the same application. Note, however, that the destination
address does not have to be a valid IP address; it can be a non-valid IP
address that is used exclusively for a distribution list, for example.
4. Enter the Name for identifying this distribution list.
5. Click on the Add Site button. A search dialog will open, allowing the
desired subnet(s) to be selected from the VMS network.
Figure 5-31 Add Site Dialog, Search Network
6. Double-click on the appropriate network element to navigate the network
tree until the desired subnet address appears, as shown in figure 5-32. Select
the subnet and click OK to add this site to the list.
Note: Only one selection at a time can be added to the list.
NOTE