User guide

VMS Service Managers
5-22 VMS User Guide
Figure 5-26 Revised Policy Tab
Application policies can be modified by directly clicking on them and editing
the parameters. To remove a policy, right-click on the policy and select Remove
from the pull-down menu. A confirmation is required to execute this command.
Figure 5-27 Remove Application Policy dialog
Distribution Lists Tab
Distribution Lists are used to define multiple target subnets for point-to-multi-
point distribution on an inband service connection whenever an upstream switch
to a specific destination IP address occurs, such as to a multicast address.
Distribution lists are created here at the global system level, but can also be
created, modified, or disabled at the site level (Subnet Manager) to accommo-
date specific site requirements.
In the Distribution Lists box you can Insert, Modify, and Remove lists for indi-
vidual subnets, then either select or de-select these lists once entered through the
use of the check boxes.