User guide

VMS Network Configuration
3-42 VMS User Guide
Selecting CIR Normal will allow this Remote to access the Low Priority
Bandwidth spectrum (see figure 3-47) when attempting to switch above its
CIR.
Selecting CIR Priority will grant access to the High Priority Bandwidth
spectrum for this Remote.
2. Repeat for each Antenna associated with a CIR Remote.
Note: An attempt to enable CIR for a remote that results in the available band-
width (the sum of the Guaranteed, Normal, and Priority bandwidths)
exceeding the Total Pool Bandwidth will be denied, and an error
message will appear (figure 3-52).
Figure 3-52 Enable CIR Error
Adjust Bandwidth Allocation
1. Right-click on the Satellite and open the Properties window.
2. Select the CIR tab, as shown in figure 3-53.
NOTE