User guide

VMS Network Configuration
3-36 VMS User Guide
corresponding to the mouse position appear in the upper left corner of the
window as a reference.
Figure 3-45 Adding Sites, Network Manager and ViperGlobe
7. Execute the Create Site command and enter the Name to be used for the site.
In the Tree View, expand the Network to expose the newly created site.
8. Right-click on the Site icon and select Properties.
The exact coordinates can be entered in the dialog that opens.
9. After adding a site, drag and drop the associated Antenna from the Satellite
Tree View onto the Site.
10. Once the Hub site and at least one Remote site have been added and popu-
lated with their antennas, a Carrier Line should appear between them
(figure 3-46), assuming that the sites are up and there is at least one active
link.