User guide

Chapter 3 - VMS Configuration 3-33
VMS Network Configuration
mation received from the antenna ACU. An example of this type of network is
depicted in figure 3-41, below.
Figure 3-41 Vipersat Network, Global Map View
This section describes the procedure for configuring Network Manager in the
VMS, and graphically displaying the network using ViperGlobe.
1. From the Tree View, right-click on the Network Manager icon and select
Create Network (figure 3-42).
2. In the Network Properties dialog that opens, enter a Network Name.
3. Expand the Network Manager to expose the new Network icon.