User guide

Chapter 3 - Using the Command Line Interface (CLI) 3-9
Vipersat Configuration
Figure 3-7 STDMA screen (Hub, Dynamic Cycle type)
Figure 3-8 STDMA screen (Remote)
STDMA
This menu item is read-only and shows the current state of STDMA in the
CDM-570/570L. In order to change the STDMA state in the CDM-570/570L,
refer to the section “Feature Configuration” on page 3-5.
STDMA Tx Rate
This menu item shows the STDMA transmit rate in bps. This item is read-only
and cannot be modified in this menu.