Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–14
8.2.4 Demod (Configure Demodulator) Pages
The hyperlinks available under the ‘Demod’ tab provide the user with the means to configure all
demodulator parameters.
Note: The ‘LNB’ hyperlink is available only on the CDM-562L/564L Web Server Interfaces.
Depending on the unit in use and the number of configured modulators on that unit, this page provides
the user with the means to control and monitor up to four Low-Noise Block Downcoverters (LNBs),
on a per-Demod basis, when connected to the CDD-562L/564L.
8.2.4.1 Demod | Demod
Figure 8-10. Demod | Demod page
Use the ‘Demod | Demod’ page (Figure 8-10),
on a per-Demod basis, to configure demodulator
operating (Rx) parameters, view current performance statistics, and select the Rx AGC or Eb/No
Alarm Masks as Masked or Active.
IMPORTANT
The Rx Interface Types have highest priority and should be configured before
setting any other parameters.
For details pertaining to the configuration parameters available on this page, refer to Chapter 5.
FRONT PANEL OPERATION.
Once the desired configuration settings have been made in each section, click [Submit] as needed
in that section to save those changes.