Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–12
FAST Option Purchase Access Code required to enable these features – see Appendix C. FAST
ACTIVATION PROCEDURE for further details).
8.2.3.4 Admin | SNMP
IMPOR TANT
Use of this page is restricted to users with Administrator login priveleges.
Figure 8-8. Admin | SNMP page
Use the ‘Admin | SNMP’ page (Figure 8-8) to set and return administration inform
ation for the
CDM-56X Simple Network Management Protocol (SNMP) and Vipersat features.
For details pertaining to the configuration parameters available on this page, refer to Chapter 5.
FRONT PANEL OPERATION and Sect. 7.4 SNMP INTERFACE.
Simple Network Management Protocol
The Administator may:
• Set Simple Network Management and Enable Authentication Trap, using the associated
drop-downs, as Enabled or Disabled.
• Assign up to two SNMP Trap IP addresses (Trap IP Primary and Trap IP Secondary).
• Set the Trap Version, using the associated drop-down, as SNMPv1 or SNMPv2.
• Assign SNMP Read, Write, and Trap Community Strings. The factory defaults for these
parameters are as follows:
o Read Community String public
o Write Community String private
o Trap Communty String comtech