Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–11
8.2.3.3 Admin | Features
Figure 8-7. Admin | Features page
Use the ‘Admin | Features’ page (Figure 8-7) to
establish operating parameters for the
demodulator’s standard and optional features:
Features – Standard
• To set Telnet or Ping Reply functionality, click Enabled or Disabled.
• To set Downlink Route All Available Multicast, from the list, select Enabled or Disabled.
• To set L2 Rx Header Compression, from the list, select Enabled or Disabled.
Fast Option Purchase
Use the field provided here to enter the FAST Option Purchase Access Code obtained from
Comtech EF Data – see Appendix C. FAST ACTIVATION PROCEDURE for further details .
Features – Optional
Using the drop-down menus, set operation for STDMA, Vipersat, IGMP, Auto Switching, or
L3/L4/L5 RX Header Compression by clicking Enabled or Disabled (note that when a feature
is unavailable, the drop-down list for that selection will be rendered inoperable).
Once the desired configuration settings have been made on this page, click [Submit] to save these
changes.
Feature Availability
This read-only section displays the operational status of these features as Available (i.e.,
installed/operational) or Unavailable (must be purchased – contact Comtech EF Data to acquire the