Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–9
8.2.3.2 Admin | Access
Figure 8-6. Admin | Access page
Use the ‘Admin | Access’ page (Figure 8-6) to
set up and maintain the user names, passwords,
E-mail server, and host IP addresses as needed to facilitate communication with the CDD-56X Web
Server Interface.
System Account Access Information
• Admin, Read/Write, and Read Only Names and Passwords: The factory defaults for
these names/passwords are:
o Admin comtech/comtech
o Read/Write opcenter/1234
o Read Only monitor/1234
Note that the Name and Password fields can each accept any alphanumeric combination
with a maximum length of 10 characters.
• SMTP Server: Specify the mail server IP address from where you want to send the E-mail.
• SMTP Domain / Destination Name: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the E-mail feature of the ‘Home | Support’
Page (Sect. 8.2.2.2 in this chapter) is to be used.
o For SMTP Domain Name, specify the domain of the E-mail server (usually
found to the right of the @ symbol in an E-mail address).
o For SMTP Domain Destination,specify the E-mail recipient name (usually
found to the left of the @ symbol in an E-mail address).