Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–2
8.1.2 Introduction to the Web Server Interface
Note: For the purpose of example, this chapter features pages from the CDD-564 or CDD-564L
Web Server Interfaces. Functionality that is not typical for all demodulators is noted accordingly.
The embedded Web Server application provides the user with an easy to use interface to
configure and monitor all aspects of the CDD-56X. These Web pages have been designed for
optimal performance when using Microsoft’s Internet Explorer Version 5.5 or higher (the
examples shown use Internet Explorer Version 6.0).
By rolling the cursor over the navigation tabs located at the top of
each page (right), the user can select from the available nested
hyperlinks.
8.1.3 Selecting Demodulators
There are two demod channels available on the
CDD-562L; four demod channels are available
on the CDD-564/564L.
Select the individual demodulator channel
number, located in the upper left hand corner of
every web page, to designate that demodulator
as active. Web pages that do not impact per-
Demod parameters (i.e., routes, administrative
pages, etc.) are not affected by any change to
this demodulator selection.
8.2 Web Server Interface Page Descriptions
Refer to the following chapter sections for the Web Server Interface page available either top-
level or nested (i.e., accessible via hyperlink) under the navigation tabs that are accessible at the
top of each page:
For: Refer to:
“Splash” (Home) Page Sect. 8.2.1
Home Pages Sect. 8.2.2
Admin (Administration) Pages Sect. 8.2.3
Demod (Configure Demodulator) Pages Sect. 8.2.4
IP Pages Sect. 8.2.5
Stats Pages Sect. 8.2.6
Maint (Maintenance) Pages Sect. 8.2.7
Selects Demodulators 1 or 2 (CDD-562L)
or 1, 2, 3, or 4 (CDD-564/564L)