Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Ethernet Management MN/CDD564L.IOM
7–9
7.5 Telnet Interface
The modem provides a Telnet interface for two primary functions:
• Equipment M&C via the Command Line Interface (CLI) application. For further
details about using this application, refer to Chapter 9. IP MODULE CLI AND
TELNET OPERATION.
• Equipment M&C via Comtech EF Data’s CDM/CDD NMCS application and
associated Remote Control protocol. For further details about using this application,
refer to Appendix X. NMCS PROTOCOL.
The Telnet interface requires user login at the Administrator level and Read/Write level.
The following screen capture shows this login process:
Once logged into the Telnet interface as the Administrator, the user can access the NCMS
interface defined in Appendix D. CDM/CDD NMCS PROTOCOL, REV 1.0, as shown in the
following example: