Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Ethernet Management MN/CDD564L.IOM
7–2
7.3 Web Server (HTTP) Interface
The embedded Web Server application provides the user with an easy to use interface to
configure and monitor all aspects of the demodulator. These pages have been designed for
optimal performance when using Microsoft’s Internet Explorer 5.5 or higher (the browser
examples shown below use Microsoft Internet Explorer 6.0)..
The Web Server Interface is accessible using a Web browser by typing “http://www.xxx.yyy.zzz”
in the browser’s Address box, where “www.xxx.yyy.zzz” is the IP address of the demodulator:
Once a valid IP address is entered, the user is prompted to type in a
valid User Name and Password, similar to the dialogue box shown
to the right (the site IP address shown in this example is for display
purposes only. Contact your network administrator to determine
the appropriate IP address assignment for your unit).
Observe the following:
Typical HTTP Login Access Levels, User Names, and Passwords are defined as follows:
User Interface
User Login Access Level
Admin Use
r
Read/Write Use
r
Read Only Use
r
Web
Full Access to all
Web Pages
No Access to Admin pages No Access to Admin pages
Full Access for all other
Web Pages
View Only Access for all other
Web Pages
CDD-56X Demodulator Web Server Default Name/Passwords
Admin User Read/Write User Read Only User
comtech/comtech opcenter/1234 monitor/1234
Type the appropriate User Name and Password, then click OK to complete login. For further details
on using the Web Server Interface, refer to Chapter 8. WEB SERVER INTERFACE.