Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Rear Panel Connector Pinouts MN/CDD564L.IOM
3–5
3.5.2 Direct Current (DC) Power Connector (Optional)
This optional connector supplies the Direct Current (DC) power
to the demodulator. Observe the following:
DC Power Specifications
Input Power
48 watts (typical)
55 watts (maximum)
Input Voltage
48 volts DC, nominal
(36 volts to 60 volts)
Connector Type Corcom PS series
Mating Connector Corcom GA210 or Molex 03-12-1026
Fuse Protection 8A Slow-blow
Line and neutral fusing
20 mm type fuses (quantity 2)
IMPORTANT
For continued operator safety, always replace the fuses with the correct type
and rating.
3.5.3 Ground Connector
A #10-32 stud on the rear panel of the modem is used for connecting a common
chassis ground among equipment.
Note: The AC power connector provides the safety ground.