Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Installation MN/CDD564L.IOM
2–3
Equipment Rack
Rear Mounting Rail
#10 Shoulder Screw
#10 Bracket Bolt
Support Bracket
Back of unit
#10 Split Washer
#10 Flat Washer
#10 Flat Washer
#10 Hex Nut
Figure 2-1. Optional Rear-Mounting Support Bracket Kit Installation
2.3 Configuration
There are no internal jumpers to configure, no interface cards to install, and no other options to
install: all configurations are carried out entirely via software.
The unit will ship with a default 64 kbps, QPSK, Rate 3/4 configuration; the unit should first be
further configured locally, using the EIA-232 Console Interface.
Note: The auto-sensing AC power supply does not require any adjustments. Simply plug in the
supplied line cord, and turn on the switch on the rear panel.
2.4 Connect External Cables
Having entered the desired configuration, and proceed to connect all external cables to the
connectors outlined in the next chapter (Chapter 3. REAR PANEL CONNECTOR PINOUTS).
Should difficulties occur, contact Comtech EF Data Customer Support for assistance.