Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Appendix D MN/CDD564L.IOM
D–13
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
TX Header
Compression
enable/disable
THE= 1 byte, value
of 0, 1, 2 or 3
Command or Query.
Enables or disables the Transmit 3xDES feature, where:
1 = Enabled (EasyConnect Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Note: Acts as command only in EasyConnect mode; in router mode, it’s
read-only.
Restriction: Cannot enable if the 3xDES FAST feature has not been
purchased.
THE =
THE!
THE? THE =x
(see description of
arguments)
Telnet Enabled TLE= 1 byte, value
of 0 or 1
Command or Query
Enables or disables the telnet interface, where:
0 = Disabled
1 = Enabled
Note: When disabled, the user will not be able to log in to the telnet
interface.
TLE =
TLE!
TLE? TLE =x
(see description of
arguments)
TX Payload
Compression
enable/disable
TPE= 1 byte, value
of 0, 1, 2 or 3
Command or Query
Enables or disables the Transmit 3xDES feature, where:
0 = Disabled
1 = Enabled (EasyConnect Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Note: Acts as command only in EasyConnect mode; in router mode, it’s
read-only.
Restriction: Cannot enable if the 3xDES FAST feature has not been
purchased
TPE =
TPE!
TPE? TPE =x
(see description of
arguments)