Manualshelf

Product specifications

ManualsBrandsComtech EF Data ManualsComputer equipmentVipersat CDD-564L
121122123124125126127128129130
CDD-562L/564 Demodulator with IP Module Revision 1
Appendix A MN/CDD564L.IOM
A–5
A.3 Router Mode – Point-to-Point System Configuration
The steps in this section are used to establish a Router Mode Point-to-Point System Configuration.
Note that all steps outlined in the subsections that follow refer back to Figure A-2.
Figure A-2. Router Mod
e Point-to-Point System Configuration
A.3.1 PC Configuration
Step Description
1 Set the IP address on PC1 to 172.16.10.11; Set Mask to 255.255.255.0; Set PC Gateway to
172.16.10.1.
2 Set the IP address on PC2 to 172.17.10.11; Set Mask to 255.255.255.0; Set PC Gateway to
172.17.10.1.
3
Reboot the PCs (if required).