Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–23
Route Table
This read-only window displays the currently active Route Table entries.
8.2.5.4 IP | Multicast
Figure 8-18. IP | Multicast page
Use the ‘IP | Multicast’ page (Figure 8-18) to enter
multicast routes into the IP Module to route
multicast IP traffic over the satellite or to another device on the local LAN.
Multicast Route Table Entry
• Name – String label provided to help users maintain their network. The assigned name
cannot contain any whitespace and must be unique.
• Downlink Route All Available Multicast (read-only) – Displays the status of this
feature as Enabled or Disabled.
• Multicast IP Address – This address defines the route to the destination network.
• Next Hop HDLC (Eth to Sat Only) (read-only) – Displays the desired Next Hop HDLC
IP Address for traffic to be sent over the satellite, within the following ranges:
o Point-to-Point: No HDLC address
o Small Network: 0x1 – 0xFE
o Large Network: 0x1 – 0xFFFE
• Sat to Eth – Select the valid packet handling value for routing to a destination network,
using the associated drop-down:
o Forward – Multicast is only forwarded across link if both units have this feature
enabled.