Product specifications

CDD-562L/564 Demodulator with IP Module Revision 1
Web Server Interface MN/CDD564L.IOM
8–22
8.2.5.3 IP | Routes
Figure 8-17. IP | Routes page
Use the ‘IP | Routes’ page (Figure 8-17) to
enter static routes into the IP Module, on a per-
Demod basis, for the purpose of routing IP traffic over the satellite or to another device on the
local LAN.
Route Table Entry
• Name: Provided to help users maintain their network, the assigned name cannot contain
any whitespace and must be unique.
• IP Address/Mask: This address defines the route to the destination network.
• Next Hop Address: When the route is of type Sat to Eth (as per the ‘IP | Multicast’
page), the Next Hop Address is used to define the locally attached router’s IP address,
which can be used to route to the destination network. This is the case when there is
another subnet addressed to the modem on the LAN side. The address may be assigned,
dependant on the selected Working Mode, within the following ranges:
o Point-to-Point: No HDLC address
o Small Network: 0x1 – 0xFE
o Large Network: 0x1 – 0xFFFE
• Add/Change: Click to add a Route Entry to the Route Table or modify an existing entry.
The entry will be added to the table (or the existing entry modified) for processing once
the user clicks [Submit].
• Delete: Click to flag a Route Entry for removal from the Static Route Table. The entry
will be deleted from the table once the user clicks [Submit].