Product specifications

CDD-562L/564 Demodulator with IP Module Revision 2
Quick Start Guide MN/CDD564L.IOM
7–5
7.2.5 Restoring Factory Default Configuration
The remaining sections in this chapter assume that the CDM-IP is still in factory default
configuration for IP. If this is not the case, the factory default configuration may be restored from
the menu as follows:
Step Task
1 From the Main Menu, select the Operations and Maintenance submenu [O].
2 From the Operations and Maintenance submenu, select Database Operations submenu [D].
3 From the Database Operations menu, select Restore Factory Default option [R].
4 When the following prompt is displayed:
Are you sure you want to restore factory default settings?
WARNING: Choosing Yes will restore factory defaults and then
reboot..
Type [Y] (yes) to confirm restore.
By completing the above procedure, this erases any user configurations made to date and restores
the CDD-56X to its factory default configuration.
Proceed to Section 7.3 to
perform the Router Mode configuration.