Product specifications

CDD-562L/564 Demodulator with IP Module Revision 2
Rear Panel Connections MN/CDD564L.IOM
3–7
3.3.2 100V/240V Alternating Current (AC) Power Interface (Standard)
Figure 3-3. CDD-56X AC Power Interface
3.3.2.1 AC Operation – Applying Power









Figure 3-4. Applying AC Power to the CDD-56X

To apply AC power to the CDD-56X (Figure 3-4):
• First, plug the provided AC power
cord female end into the unit.
• Then, plug the AC power cord male end into the user-supplied power source.
• Finally, switch the unit ON.
Feature Description
1 On / Off Switch
2 Press-fit Fuse Holder
3 IEC Three-prong Connector
AC Power Specifications
Input Power 40W maximum, 20W typical
Input Voltage
100V to 240V AC, +6%/-10%, autosensing
(total absolute max. range is 90V to 254V AC)
Connector Type IEC
Fuse Protection
Line and neutral fusing
(2X) 5mm x 20mm Slow-blow type fuses:
T3.15A (100V or 240V AC operation)