Product specifications

CDD-562L/564 Demodulator with IP Module Revision 2
Rear Panel Connections MN/CDD564L.IOM
3–5
3.2.3 Utility Connections
3.2.3.1 Remote Control (DB-9M)
THIS CONNECTOR IS NOT
A STANDARD EIA-232 INTERFACE. IT IS NOT
INTENDED FOR CUSTOMER USE. IT IS INTENDED FOR FACTORY TEST USE
ONLY
. CONTACT CEFD CUSTOMER SUPPORT PRIOR TO CONNECTING ANY
EQUIPMENT TO THIS INTERFACE.
The Remote Control interface is a 9-pin Type ‘D’ male (DB-9M) connector,
reserved for use in in-factory test applications.
Note the following:
Pin # Description Direction
1 Ground --
6 Selected Demod RS-422 Rx Data + In
2 EIA-232 Transmit Data (38.4k, 8N1 fixed) Out
7 Selected Demod RS-422 Rx Data - In
3 EIA-232 Receive Data (38.4k, 8N1 fixed) In
8 Selected Demod RS-422 Tx Clock + Out
4 Selected Demod I-Channel monitor Out
9 Selected Demod RS-422 Tx Clock - Out
5 Selected Demod Q-Channel monitor Out
3.2.3.2 Console (RJ-11 Async-Serial Port)
The Console port is a standard 6-pin RJ-11 modular jack. The Async-Serial
EIA-232 DCE Console services the IP Module Command Line Interface
(CLI). The supplied adapter cable connects the user PC to the Console port. A
user-supplied terminal emulator program such as HyperTerminal or Tera Term
is used for management of demodulator and IP Module functions.
Note the following:
Pin # Function
1 Ground
2 Rx
3 Tx
4 Ground
5 Not used
6 Not used