User guide

Vipersat Configuration
3-46 Vipersat CDD-56X Series User Guide
Note that this screen dialog example displays the frequency range for a CDD-
562L/564L L-Band Demodulator/Router. For a CDD-564, the range displayed
will be either 50 to 90 MHz or 100 to 180 MHz.
Receive Data Rate
Enter N to use the dialog shown in figure 3-58 to set the Receive Data Rate for
the selected Demod’s Home State.
Figure 3-58 Receive Data Rate prompt
Note that the valid range for this parameter will vary depending on the Demod-
ulation Type, Coding Rate, and FAST feature Data Rate.
Receive FEC Type
Enter O to use the dialog shown in figure 3-59 to set the Receive FEC Type for
the selected Demod’s Home State. Turbo must be selected when operating in
Vipersat mode.
Figure 3-59 Receive FEC Type prompt
Receive Coding Rate
Enter P to use the dialog shown in figure 3-60 to set the Receive Coding Rate
for the selected Demod’s Home State.