Product specifications

UT-4500-A Series Upconverters Revision 0
Appendix A MN-UT4500A
A–8
A.7.1.4 Media Access Control (MAC) Address
The MAC command is used to query the unique MAC address of the unit’s Ethernet management
port.
Command Details
Retrieve MAC: <DEV/MAC_'cr'
Confirmation: >DEV/MAC_xx-xx-xx-xx-xx-xx'cr''lf']
Where:
xx=MAC address byte in hexadecimal
A.7.1.5 IP Address
The IPA command is used to set the IP address and network prefix for the 100BASE-TX Ethernet
management port. The factory default value is 192.168.1.4.24.
Command Details
Set IP Address: <DEV/IPA_aaa.bbb.ccc.ddd.yy'cr’
Where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255, but they cannot all be zero.
yy is the Subnet Mask Length (range: 8 to 30)
Confirmation: >DEV/IPA_ aaa.bbb.ccc.ddd.yy'cr'lf']
Retrieve IP Address: <DEV/IPA_'cr'
Confirmation: >DEV/IPA_ aaa.bbb.ccc.ddd.yy'cr''lf']
A.7.1.6 IP Gateway
The IPG command is used to set the IP gateway address for the Ethernet management port. The
factory default value is 192.168.1.5.
Command Details
Set IP Gateway: <DEV/IPG_aaa.bbb.ccc.ddd'cr’
Where:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 0-255, but they cannot all be zero.
Confirmation: >DEV/IPG_ aaa.bbb.ccc.ddd'cr'lf']
Retrieve IP Gateway: <DEV/IPG_'cr'
Confirmation: >DEV/IPG_ aaa.bbb.ccc.ddd'cr''lf']