Product specifications

UT-4500-A Series Upconverters Revision 1
Appendix A MN-UT4500A
A–18
A.7.2.10 Clear Preset Configuration
Use thE CLR command to clear a single preset value.
Command
Details
Clear a Preset:
<DEV/CLR_nn'cr'
Confirmation:
>DEV/CLR_nn_Cleared'cr''lf']
Note: nn = Preset Number = 01 to 32.
A.7.2.11 Select Preset Configuration
Use the SEL command to configure the converter to the frequency and attenuation data
assigned to a given preset number.
Command
Details
Select Preset:
<DEV/SEL_nn'cr'
Confirmation:
>DEV/SEL_nn_Selected'cr''lf']
Note: nn = Preset Number = 01 to 32.
Only programmed preset numbers are available.