Specifications

SDM-300L3 Satellite Modem Revision 0
Remote Control Operation MN/SDM300L3.IOM
A–13
ASYNC
Receive
Channel
Stop Bits
Command:
Response:
Status:
Response:
<add/RCSB_n'cr'
>add/RCSB_n'cr''lf']
<add/RCSB_'cr'
>add/RCSB_n'cr''lf']
Where: n = 1 or 2 (stop bits).
Note: RX ASYNC Overhead only.
ASYNC
Transmit
Overhead
Channel
Parity
Command:
Response:
Status:
Response:
<add/TOCP_xxxx'cr'
>add/TOCP_xxxx'cr''lf']
<add/TOCP_'cr'
>add/TOCP_xxxx'cr''lf']
Where: xxxx = ODD, EVEN, or NONE.
Note: TX ASYNC Overhead only.
ASYNC
Receive
Overhead
Channel
Parity
Command:
Response:
Status:
Response:
<add/ROCP_xxxx'cr'
>add/ROCP_xxxx'cr''lf']
<add/ROCP_'cr'
>add/ROCP_xxxx'cr''lf']
Where: xxxx = ODD, EVEN, or NONE.
Note: RX ASYNC Overhead only.
ASYNC
Transmit
Communica
tions Type
Command:
Response:
Status:
Response:
<add/TCT_xxxxxxxx'cr'
>add/TCT_xxxxxxxx'cr''lf']
<add/TCT_'cr'
>add/TCT_xxxxxxxx'cr''lf']
Where: xxxxxxxx = RS232, RS485 (4- Wire),
RS485_2W (2-Wire).
Note: TX ASYNC Overhead only.
ASYNC
Receive
Communica
tions Type
Command:
Response:
Status:
Response:
<add/RCT_xxxxx'cr'
>add/RCT_xxxxx'cr''lf']
<add/RCT_'cr'
>add/RCT_xxxxx'cr''lf']
Where: xxxxx = RS232 or RS485.
Note: RX ASYNC Overhead only.
Transmit
Data Phase
Command:
Response:
Status:
Response:
<add/TDP_xxxx'cr'
>add/TDP_xxxx'cr''lf']
<add/TDP_'cr'
>add/TDP_xxxx'cr''lf']
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
Receive
Data Phase
Command:
Response:
Status:
Response:
<add/RDP_xxxx'cr'
>add/RDP_xxxx'cr''lf']
<add/RDP_'cr'
>add/RDP_xxxx'cr''lf']
Where: xxxx = NRM (normal data phasing), INV
(inverted data phasing).
CTS Delay
Time
Command:
Response:
Status:
Response:
<add/CTSD_xx'cr'
>add/CTSD_xx'cr''lf']
<add/CTSD_'cr'
>add/CTSD_xx'cr''lf']
Where: xx = 0 to 60 (number of seconds).
IDR
Transmit
ESC Type
Command:
Response:
Status:
Response:
<add/IDRT_xxxxx'cr'
>add/IDRT_xxxxx'cr''lf']
<add/IDRT_'cr'
>add/IDRT_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: TX IDR Overhead only.
IDR
Receive
ESC Type
Command:
Response:
Status:
Response:
<add/IDRR_xxxxx'cr'
>add/IDRR_xxxxx'cr''lf']
<add/IDRR_'cr'
>add/IDRR_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: RX IDR Overhead only.
IBS
Transmit
ESC Type
Command:
Response:
Status:
Response:
<add/IBST_xxxxx'cr'
>add/IBST_xxxxx'cr''lf']
<add/IBST_'cr'
>add/IBST_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: TX IBS Overhead only.
IBS Receive
ESC Type
Command:
Response:
Status:
Response:
<add/IBSR_xxxxx'cr'
>add/IBSR_xxxxx'cr''lf']
<add/IBSR_'cr'
>add/IBSR_xxxxx'cr''lf']
Where: xxxxx = DATA (64K DATA) or AUDIO
(2x32K AUDIO).
Note: RX IBS Overhead only.