Specifications

s:\tpubs\manuals\released_word\modems\sdm300l3_rev0\erratas\errata n.doc
1
Errata N
Comtech EF Data Documentation Update
Subject:
Add Transmit Mode Selection
Date:
December 1, 2003
Document:
SDM-300L3 Satellite Modem Installation and Operation Manual,
Rev. 0, dated August 1, 2002
Part Number:
MN/SDM300L3.EN0
Collating Instructions:
Attach this page to page A-15
Comments:
The following changes provide updated information for page A-15. This information will be
incorporated into the next revision.
Change Specifics:
Transmit
Mode
Selection
Command:
Response:
Status:
Response:
<add/TXM_xxxxx’cr’
>add/TXM_xxxxx’cr’’lf]
<add/TXM_’cr’
>add/TXM_xxxxx’cr’’lf’]
This command configures the modem receiove side to
operate in burst mode or continuous mode.
Where: xxxxx = Burst or CONT (Continuous)