Specifications

SDM-300L3 Satellite Modem Revision 0
Front Panel Operation MN/SDM300L3.IOM
4–117
FUNCTION SELECT: MODEM TYPE:
CONFIGURATION CODE – CARD #3 (CONDITIONAL)
CONFIGURATION
CODE – CARD #3
Comtech EF Data-supplied code. Press <ENTER>
IMPORTANT
This menu appears only if the Overhead card is installed.
1)AAAAAAAAAA
2)AAAAAAAAAA
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
←] or [→] to move the flashing cursor. Press [↑] or [↓] to increment or
decrement the digit at the flashing cursor. Press <ENTER>
to execute the change.
Entering this code enables the corresponding modem option. To purchase an option,
contact an Comtech EF Data marketing representative for more information.
4.6.6.8 FUNCTION SELECT: UTILITY: FACTORY SET-UP
UTILITY
FACTORY SET-UP
CAUTION
This configuration is used for factory alignment. Unauthorized persons
should not change factory setup. Doing so can cause modem failure.