Specifications

SDM-300L3 Satellite Modem Revision 0
Front Panel Operation MN/SDM300L3.IOM
4–107
FUNCTION SELECT: UTILITY: SYSTEM: MASTER RESET
MASTER RESET
HARD/SOFT
Master reset function.
CAUTION
Initiating a hard reset will reset the modem and calls the default
configuration settings from ROM. Initiating a soft reset will reset the
modem hardware, but saves the current configuration settings.
Select <ENTER>once to access HARD or SOFT.
1. Press [←] or [→] to make the selection.
2. Press <ENTER>.
3. Press [→] five times to move the cursor to YES.
4. Select YES and press <ENTER> again.
Note: The following parameters do not revert to default settings after a hard reset:
• Address
• Parity
• Baud Rate
• Remote Type
• Ext AGC: Min Pwr
• Ext AGC: Max Pwr
• Display Contrast