Specifications

SDM-300L3 Satellite Modem Revision 0

Front Panel Operation MN/SDM300L3.IOM

4–93

FUNCTION SELECT: UTILITY: INTERFACE:

FRAMING STRUCTURE: INTERFACE: FRAMING STRUCTURE:

T1 FRAMING

STRUCTURE: G.704

Upon entry, the framing type (T1 or E1) is displayed on Line 1. The framing structure of

each type (None or G.704) is displayed on Line 2.

Press [←] or [→] and [↑] or [↓] to select framing structure and type.

Press <ENTER> to execute the change.

FUNCTION SELECT: UTILITY: INTERFACE:

FRAMING STRUCTURE: E1 FRAMING

E1 FRAMING

STRUCTURE: G.704

Upon entry, the framing type (T1 or E1) is displayed on Line 1. The framing structure of

each type (None or G.704) is displayed on Line 2.

Press [←] or [→] and [↑] or [↓] to select framing structure and type.

Press <ENTER> to execute the change.

FUNCTION SELECT:UTILITY: INTERFACE: RTS TX-IF CNTRL

RTS TX-IF CNTRL

OFF

Programs the modem to allow a Request To Send (RTS) signal to enable or disable the

output carrier when data is ready for transmission.