Specifications
SDM-300L3 Satellite Modem Revision 0
Front Panel Operation MN/SDM300L3.IOM
4–52
FUNCTION SELECT: MONITOR:EB/NO
EB/NO
16.0 dB
Displays the current E
b
/N
0
or “No Data” (if carrier is not locked).
Range: 2.0 to 16.0 dB.
Notes:
1. Low limit is based on the data rate.
2. High limit is 16.0 dB.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.
FUNCTION SELECT: MONITOR: RECEIVE SIGNAL
RECEIVE SIGNAL
-45.0dBm
Displays the current receive signal level.
Range: -135 dBm + 10 log (SR) to -85 dBm + 10log (SR)
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.
FUNCTION SELECT: MONITOR: SWEEP FREQUENCY
SWEEP FREQUENCY
+ 0 Hz
Displays the current offset frequency or “No Data” (if carrier is not locked).
Range: -500,000 to +500,000 Hz.
Press[←] or [→] to move the flashing cursor, and [↑] or [↓] to increment or decrement
the selected kbps. Press <ENTER> to execute the change.