Specifications

SDM-300L3 Satellite Modem Revision 0
Front Panel Operation MN/SDM300L3.IOM
4–35
FUNCTION SELECT: CONFIGURATION: INTERFACE:
RX CODING FORMAT (CONDITIONAL)
RX CODING FORMAT
OFF
IMPORTANT
Conditional: This menu is only available when the RX G.703 interface is
programmed. This requires installation of the optional Overhead Card.
Programs the receiver for AMI, B8ZS, or HDB3 coding.
Upon entry, the current coding format is displayed. Press [↑] or [↓] to make the selection.
Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: INTERFACE:
SERVICE CHANNEL ADJUST (CONDITIONAL)
SERVICE CHANNEL
ADJUST
IMPORTANT
Conditional: This menu is only available when IDR has been selected
for modem type in the Utility menu and the Overhead Card is installed.
This configuration function is used to set service channel audio levels at TX-1, TX-2,
RX-1, or RX-2.
Upon entry, press [←] or [→] to select the desired service channel. To adjust the service
channel level (+10.0 to -20.0 dBm), press <ENTER>. Press [↑] or [↓] to adjust the
service channel. Press <ENTER> to execute the change.