Specifications

SDM-300L3 Satellite Modem Revision 0

Front Panel Operation MN/SDM300L3.IOM

4–24

FUNCTION SELECT: CONFIGURATION: DEMODULATOR:

LNB POWER

OFF

Programs the LNB Power On or Off. The LNB voltage is transmitted up the center

conductor of the RF-IF connector.

Upon entry, the current status of the descrambler is displayed. Press [↑] or [↓] to make

the selection. Press <ENTER> to execute the change.

FUNCTION SELECT: CONFIGURATION: DEMODULATOR:

LNB VOLTAGE

13 VDC

Programs the LNB Power at 13, 18, or 24 VDC.

Upon entry, the current status of the descrambler is displayed. Press [↑] or [↓] to make

the selection. Press <ENTER> to execute the change.

FUNCTION SELECT: CONFIGURATION: DEMODULATOR:

LNB 10 MHZ REF

LNB 10 MHz REF

OFF

Programs the LNB 10 MHz REF to On or OFF. The LNB 10 MHz reference is

transmitted out the center conductor of the RF-IF connector.

Upon entry, the current status of the descrambler is displayed. Press [↑] or [↓] to make

the selection. Press <ENTER> to execute the change.