Specifications

SDM-300L3 Satellite Modem Revision 0
Front Panel Operation MN/SDM300L3.IOM
4–18
Notes:
1. Max Symbol Rate = 2500 ksps
2. Max Data Rate for Low Var. Rate: 512 kbps.
3. OQPSK Option only: OQPSK 1/2, 3/4, and 7/8
FUNCTION SELECT: CONFIGURATION: DEMODULATOR:
RX-IF FREQUENCY (CONDITIONAL)
RX-IF FREQUENCY
1200.0000 MHz
IMPORTANT
Conditional: This menu is displayed when LO is programmed to 0
under Utility: Demodulator: RX Terminal LO menu.
Programs the demodulator receive frequency between 950 and 1750 MHz,
in 100 Hz steps.
Upon entry, the current receive frequency is displayed with the flashing cursor on the
first character. Press [←] or [→] to move the flashing cursor, and [↑] or [↓] to increment
or decrement the digit at the flashing cursor. Press <ENTER> to execute the change.
FUNCTION SELECT: CONFIGURATION: DEMODULATOR:
RX TERMINAL FREQUENCY (CONDITIONAL)
RX TERMINAL FREQUENCY
4200.0000 MHz
IMPORTANT
Conditional: This menu is available only when RX Terminal LO and Mix
are programmed under Utility: Demodulator menu.
The reminder of the functions is the same as RX-IF Frequency.
Note: This permits programming of the RX frequency of the satellite terminal, including
the modem and LNB. When properly setup it indicates the satellite frequency of the
desired RX carrier received from the satellite.