Specifications

Operation SDM-100A Satellite Modem
3–76 Rev. 0
M&C Module FW Displays M&C module firmware version.
Upon entry, the date of release of this firmware will be
displayed. This is a status window only.
FPGA Firmware Displays firmware version of the Field Programmable
Gate Array (FPGA). Upon entry, the date of release of this
firmware will be displayed. This is a status window only.
DSP Firmware Displays the firmware version installed in the Digital Signal
Processor (DSP). Upon entry, the date of release of this
firmware will be displayed. This is a status window only.
Master Reset Master reset function.
CAUTION
When a hard reset is initiated, the modem hardware is
reset, and default configuration settings will be
installed. When a soft reset is initialized, the modem
hardware will be reset, but the initial firmware
configuration settings will be saved.
Press [ENTER] once to access soft. Press [
↑] or [↓] to
alternate between hard and soft until the desired type is
visible. Press [ENTER] to select. If soft has been selected,
press [ENTER] again to reset the modem. If hard is
selected, press [
→] until the cursor is on yes, and press
[ENTER].